HD Pro Duplicator - Advanced Setup - Set Kick Speed

If Auto Kick Slow has been enabled, the Set Kick Time option will define the lowest speed that a drive can operate at. If a drive remains below this speed threshold for the amount of time defined by Set Kick Time, then it will be ejected from the operation. Tap the ENT button to change this option.

NOTE: This is only available on the 15-Target and 23-Target Hard Drive SATA Pro Duplicators.

The speed can be set between 1 and 255MB/s. The default setting is 60MB/s.

To alter the Set Kick Speed setting:

1. Power on the duplicator.
2. From the Main Copy Menu press the ESC button to enter the Menu Select mode.
3. Press the Up or Down buttons until you see Advanced Setup.
4. When Advanced Setup is displaying for you, press the ENT button to enter this menu.
5. Press the Up or Down buttons until you see Set Kick Speed.
6. When Set Kick Speed is displaying for you, press the ENT button to alter the setting.
7. Use the Up or Down buttons to alter the setting.
8. Press the ENT button to save the setting.
9. Press the ESC button to return to the Menu Select mode.