Optical Duplicator Select Partition
The Select Partition setting allows you to select a partition/image to be used as the default partition.
|
1. From the Hard Drive Setup menu, press the UP or DOWN button to navigate to Select Partition. Press the ENT button to enter the Select Partition menu. |
|
|
2. Press the UP or DOWN button to select a partition saved to the hard drive. Press the ENT button to confirm your selection. |
|
|
Note: If you haven’t loaded a Master disc image onto the hard drive, you will see the Hard drive is empty screen. |
|
|
You will see the Selected screen appear for 2 to 3 seconds and then you will be returned to the Hard Drive Setup menu. |
