HD Pro Duplicator - Kicking Slow Drives
The 15 Target and 23 Target HDD Duplicators have the ability to kick slow functioning drives from a copy/compare/erase operation.
KanguruClone HDD Duplicators duplicate drives in a synchronous process. Because of this, any copy, compare or erase that you attempt will be limited by the speed of the slowest drive connected. For example, if you are cloning to 23 target HDDs and out of those drives 22 have a max transfer rate of 90MB/s and one has a max transfer rate of 15MB/s, then duplication speed will be capped at 15MB/s.
In order to prevent a single, faulty drive from disrupting an operation, you have the ability to perform the following:
|
During copy, compare, or erase operations, you can monitor each drive’s performance using the Up or Down buttons and check the transfer rate, which may fluctuate. |
|
|
You are able to confirm settings on your duplicator to automatically kick drives without manual review. |
