HD Pro Duplicator - Advanced Setup - Brief Verify Source

Enabling Brief Verify Source will allow the duplicator to create a Source CRC value (for data only) and save it in the machine until the duplicator is turned off. After a Brief Copy is completed, the duplicator will check the source’s CRC is correct or not. This will verify whether the source data was transferred accurately during the copy process.

To perform a Brief Verify Source:

1. Power on the duplicator.
2. Connect your drive to the Source port of the duplicator.
3. From the Main Copy Menu press the ESC button to enter the Menu Select mode.
4. Press the Up or Down buttons until you see Advanced Setup.
5. When Advanced Setup is displaying for you, press the ENT button to enter this menu.
6. Press the Up or Down buttons until you see Brief Verify Source.
7. When Brief Verify Source is displaying for you, press the ENT button to start the process.
8. Once the process completes, you can press the ESC button to return to the Menu Select mode.