HD Pro Duplicator - Logging - Logging Using a USB Flash Drive

Logging your duplicator’s operations using a USB flash drive is the simplest method, however it is not recommended for auditing purposes. This is because all the duplicator’s operations are stored in an unformatted, plain-text file which is difficult to decipher. Logs generated using a USB flash drive are primarily used by Kanguru support technicians to troubleshoot problems with the duplicator.

To generate a log file using a USB flash drive:

1. Format a USB flash drive using the FAT32 file system.
2. Before powering on the Kanguru Clone duplicator, insert the USB flash drive into the USB port located on the back of the duplicator.
3. Turn on the duplicator.
4. Perform a copy, compare or erase operation.
5. When the operation is completed, power off the duplicator. You can now remove the USB flash drive.

Connect the USB flash drive to a computer. Contained within the USB flash drive will be two plain text files containing all the logged data.