HD Pro Duplicator - Main Setup - SHA256 Check
The SHA256 Check option allows you to configure whether the system checks for a matching SHA256 hash between the Source and Target drives when duplication completes successfully. Tap the ENT button to change this option.
|
Disabled |
SHA256 hash checking is disabled (default). The hash of the Source will not be checked against the Target hash at the end of each duplication process. Note: This is the Default setting. |
|
Enabled |
SHA256 hash checking is enabled. The hash of the Source will be checked against the Target hash at the end of each duplication process. |
To alter the SHA256 Check setting:
- Power on the duplicator.
- From the Main Copy Menu press the ESC button to enter the Menu Select mode.
- Press the Up or Down buttons until you see Main Setup.
- When Main Setup is displaying for you, press the ENT button to enter this menu.
- Press the Up or Down buttons until you see SHA256 Check.
- When SHA256 Check is displaying for you, press the ENT button to alter the setting.
- Once you have altered the setting, you can press the ESC button to return to the Menu Select mode.
