The Kanguru Defender 3000 has Achieved FIPS 140-3, Level 3 Certification, Making It an Excellent Choice for Today's Complex Data Security Environments

4-Target NVMe Duplicator - General Operation - Verify

Updated on Feb 25, 2026

Verify will check all connected drives and determine if they are readable. The verification operation will check any drive connected to a Target port and verifies that all sectors on the hard drive are readable.

To verify all drives connected to the duplicator:

Connect the drives to the duplicator.
From the Main menu, tap Verify.

Was it helpful?

Yes

Neutral

* iStorage/Kanguru defines a gigabyte (1 GB) = 1,000,000,000 bytes. Storage capacities may vary depending on operating system. The actual capacity reported by systems like Windows is often lower. In Windows operating systems, an xx GB [e.g., 16 GB] flash drive has a minimum reported capacity of xx GB [e.g., 14.4 GB]. Product storage capacity is also used for device formatting and internal functions. For additional information, see www.kanguru.com/pages/understanding-flash-drive-storage-capacity.

Recover password

4-Target NVMe Duplicator - General Operation - Verify

Thanks for your feedback