The Kanguru Defender 3000 has Achieved FIPS 140-3, Level 3 Certification, Making It an Excellent Choice for Today's Complex Data Security Environments

Optical Duplicator Rename Partition

Updated on Feb 24, 2026

The Rename Partition function allows you to rename an existing partition/image on the hard drive.

	1. From the Hard Drive Setup menu, press the UP or DOWN button to navigate to Rename Partition. Press the ENT button to enter the Rename Partition menu.
	2. Press the UP or DOWN button to select a partition on the hard drive. Press the ENT button to confirm your selection.
	Note: If you haven’t loaded a Master disc image onto the hard drive, you will see the Hard drive is empty screen.
	3. The Rename Partition screen appears. Enter a new name for the partition and confirm.
	You will see the Renamed screen appear for 2 to 3 seconds and then you will be returned to the Hard Drive Setup menu.

Was it helpful?

Yes

Neutral

* iStorage/Kanguru defines a gigabyte (1 GB) = 1,000,000,000 bytes. Storage capacities may vary depending on operating system. The actual capacity reported by systems like Windows is often lower. In Windows operating systems, an xx GB [e.g., 16 GB] flash drive has a minimum reported capacity of xx GB [e.g., 14.4 GB]. Product storage capacity is also used for device formatting and internal functions. For additional information, see www.kanguru.com/pages/understanding-flash-drive-storage-capacity.

Recover password

Optical Duplicator Rename Partition

Thanks for your feedback