Optical Duplicator Select Source
This Select Source function will allow you to select which disc drive (or hard drive if you purchased a hard drive model) will be used as the Source/Reader drive for Copy related operations.
Note: While in the Main Menu, you can press the SOURCE shortcut button on the LCD panel to directly enter the Select Source menu.
|
1. From the Main Menu, press the UP or DOWN button to navigate to Select Source. Press the ENT button to enter the Select Source menu. |
|
|
2. The current Source drive’s information is displayed on the screen. If you want to use the 1st drive as the source drive, press the UP or DOWN button to select Drive 1 and then press the ENT button to confirm your selection. |
|
|
3. If you want to use one of the other drives as the source drive, press the UP or DOWN button to select a different drive and then press the ENT button to confirm it. |
|
|
If you purchased a hard drive model, you can select the hard drive as your Source drive. Press the UP or DOWN button to select Hard Drive and then press the ENT button to confirm your selection. |
Once the source has been selected, you will be returned to the Main Menu.
Note: Press the ESC button to cancel and exit to the Main Menu. The Source drive will remain unchanged.
