USB Duplicator - Utilities Menu
The Utilities menu contains additional settings that allow you to view and modify certain features on the duplicator or media connected to it.
| Device Info | Will display general information regarding the USB devices connected to the duplicator. |
| System Info | Displays information regarding the duplicator’s hardware and firmware version. |
| Measure Speed | Displays the reported capacity and Read/Write speeds of the USB drives connected to the duplicator. |
| Verify Source | Scans the USB drive connected to the Source port to verify that it is readable. |
| Rebuild Source | This will write to all unwritten sectors on the drive connected to the Source port. |
| Calculate Checksum | Will display CRC64 checksum value for the drive connected to the Source port on the duplicator. |
| Load Default | Will reset all of the settings back to their original manufacturer’s default configuration |
| Update Firmware | Allows the user to update the firmware on the duplicator to correct certain bugs or add additional features. |
| Save | This will save all settings that have been modified on the duplicator. |
| Output Log to File | A log will be downloaded from the duplicator to a USB drive on the device. |
