HD Pro Duplicator - Advanced Setup - Set Max Daisy Chain Count

The more duplicators you have connected through daisy chain, the longer it will take to initialize during bootup. The Set Max Daisy Chain Count option allows you to configure the maximum number of duplicators the system checks for during bootup. Each duplicator has a different value:

• 15 Target Duplicator value = 4
• 23 Target Duplicator value = 6

NOTE: This is only available on the 15-Target and 23-Target Hard Drive SATA Pro Duplicators.

Tap the ENT button to change this option.

So, for example, if you are connecting two 15 Target Duplicators then you would set this value to 8. If you were connecting 2x 23 Target Duplicators then you would set this value to 12. If you were connecting a 15 Target Duplicator to a 23 Target Duplicator then this value should be set to 10.

The Set Max Daisy Chain Count can be set from 1 to 32.

To alter the Set Max Daisy Chain Count setting:

1. Power on the duplicator.
2. From the Main Copy Menu press the ESC button to enter the Menu Select mode.
3. Press the Up or Down buttons until you see Advanced Setup.
4. When Advanced Setup is displaying for you, press the ENT button to enter this menu.
5. Press the Up or Down buttons until you see Set Max DC Count.
6. When Set Max DC Count is displaying for you, press the ENT button to alter the setting.
7. Use the Up or Down buttons to alter the setting.
8. Press the ENT button to save the setting.
9. Press the ESC button to return to the Menu Select mode.