HD Pro Duplicator - Main Setup - Capacity Check
The duplicator has a built-in capacity check function which will check the capacity of the Source hard drive and the Target hard drive(s) during Disk or Brief copy processes and determine whether the drives’ capacities are the same. Tap the ENT button to change this option.
|
Disabled |
Capacity Check is disabled. When a Disk or Brief copy process is executed, the system will not check the capacity between the Source and Target drive(s) and start the copy process as normal. |
|
Enabled |
Capacity Check is enabled. When a Disk or Brief copy process is executed, the system will check the capacity between the Source and Target drive(s) to determine whether the capacity is the same. If the capacity is different the copy process will be cancelled. Note: This is the Default setting. |
To alter the Capacity Check setting:
- Power on the duplicator.
- From the Main Copy Menu press the ESC button to enter the Menu Select mode.
- Press the Up or Down buttons until you see Main Setup.
- When Main Setup is displaying for you, press the ENT button to enter this menu.
- Press the Up or Down buttons until you see Capacity Check.
- When Capacity Check is displaying for you, press the ENT button to alter the setting.
- Once you have altered the setting, you can press the ESC button to return to the Menu Select mode.
