Home Docs 7-Target, 15-Target, 23-Target Pro SATA Duplicator Knowledge Base

HD Pro Duplicator...

HD Pro Duplicator - Main Setup - No Button Sound

Updated on May 18, 2026

sidebar-icon

The No Button Sound option allows you to enable or disable the audible tone that sounds when you tap or hold a button. Tap the ENT button to change this option.

Disabled

Button sounds are disabled. No audible tones will sound when you tap or hold a button.

Enabled

Button sounds are enabled. Tapping a button will be accompanied by a short tone. Holding a button will sound a low tone followed immediately by a higher pitched tone. Note: This is the Default setting.

To alter the No Button Sound setting:

  1. Power on the duplicator.
  2. From the Main Copy Menu press the ESC button to enter the Menu Select mode.
  3. Press the Up or Down buttons until you see Main Setup.
  4. When Main Setup is displaying for you, press the ENT button to enter this menu.
  5. Press the Up or Down buttons until you see No Button Sound.
  6. When No Button Sound is displaying for you, press the ENT button to alter the setting.
  7. Once you have altered the setting, you can press the ESC button to return to the Menu Select mode.