Home Docs 7-Target, 15-Target, 23-Target Pro SATA Duplicator Knowledge Base

HD Pro Duplicator...

HD Pro Duplicator - Main Setup - Set UART Control

Updated on May 18, 2026

sidebar-icon

The Set UART Control option must be enabled in order to execute commands remotely via the Control Manager software. Tap the ENT button to change this option.

Disabled

You are unable to execute commands on the duplicator from the Control Manager software. Note: This is the Default setting.

Enabled

You can execute commands on the duplicator from the Control Manager software.

To alter the Set UART Control setting:

  1. Power on the duplicator.
  2. From the Main Copy Menu press the ESC button to enter the Menu Select mode.
  3. Press the Up or Down buttons until you see Main Setup.
  4. When Main Setup is displaying for you, press the ENT button to enter this menu.
  5. Press the Up or Down buttons until you see Set UART Control.
  6. When Set UART Control is displaying for you, press the ENT button to alter the setting.
  7. Once you have altered the setting, you can press the ESC button to return to the Menu Select mode.