Home Docs 7-Target, 15-Target, 23-Target Pro SATA Duplicator Knowledge Base

HD Pro Duplicator...

HD Pro Duplicator - Main Setup - Show Checksum

Updated on May 18, 2026

sidebar-icon

The Show Checksum option allows you to configure whether the disk checksum is displayed on the LCD screen when duplication is finished. Tap the ENT button to change this option.

Disabled

Showing the disk checksum is disabled. The checksum information will not be displayed at the end of each duplication process.  Note: This is the Default setting.

Enabled

Showing the disk checksum is enabled. The checksum information will be displayed at the end of each duplication process.

To alter the Show Checksum setting:

  1. Power on the duplicator.
  2. From the Main Copy Menu press the ESC button to enter the Menu Select mode.
  3. Press the Up or Down buttons until you see Main Setup.
  4. When Main Setup is displaying for you, press the ENT button to enter this menu.
  5. Press the Up or Down buttons until you see Show Checksum.
  6. When Show Checksum is displaying for you, press the ENT button to alter the setting.
  7. Once you have altered the setting, you can press the ESC button to return to the Menu Select mode.