HD Pro Duplicator - Main Setup - Verify Unlock
If your storage device has had its capacity locked—for example, a 160GB hard drive being restricted to 80GB—activating the Verify Unlock parameter will allow the machine to execute the VERIFY command. Once the process is complete, the target hard drive will be restored to its original 160GB storage capacity. Tap the ENT button to change this option.
|
Disabled |
Verify Unlock is disabled. Target drives will not have locked capacity restored. Note: This is the Default setting. |
|
Enabled |
Verify Unlock is enabled. Target drives will have all locked capacity restored. |
To alter the Verify Unlock setting:
- Power on the duplicator.
- From the Main Copy Menu press the ESC button to enter the Menu Select mode.
- Press the Up or Down buttons until you see Main Setup.
- When Main Setup is displaying for you, press the ENT button to enter this menu.
- Press the Up or Down buttons until you see Verify Unlock.
- When Verify Unlock is displaying for you, press the ENT button to alter the setting.
- Once you have altered the setting, you can press the ESC button to return to the Menu Select mode.
