Hard Drive Tower Duplicator - Error Code List
When a drive fails duplication, an error code can be generated. The Error Code List can give you some information to help you understand any problems that occur during duplication.
• KCLONE-5HD-TWR press the UP button to view error codes
• KCLONE-11HD-TWR press and hold the ENT button to view error codes
| Error Code | Problem |
| 11 | No Error |
| A | ATA command interface CRC error |
| B | Check target speed error |
| C | Compare error |
| D | Device command timeout error |
| E | ATA command uncorrectable error |
| F | Skip read error |
| G | ATA command ID not found error |
| H | Channel check sum failed |
| I | ATA security erase error |
| K | Unknown error |
| M | Device Pass |
| N | No device inserted |
| O | ATA SMART check error |
| P | Power on command error |
| R | ATA read error |
| S | Source read error |
| W | ATA write error |
| Y | PHY off |
For more information on the Kanguru Hard Drive Tower Duplicator, please refer to the User Manual located at HERE.
