The Kanguru Defender 3000 has Achieved FIPS 140-3, Level 3 Certification, Making It an Excellent Choice for Today's Complex Data Security Environments

HD Pro Duplicator - About - System Information

Updated on May 18, 2026

The System Information option allows you to view information regarding your duplicator’s firmware version and build.

To view your firmware version on your duplicator:

Power on the duplicator.
From the Main Copy Menu press the ESC button to enter the Menu Select mode.
Press the Up or Down buttons until you see About Menu.
When About Menu is displaying for you, press the ENT button to enter this menu.
Press the Up or Down buttons until you see System Information.
When System Information is displaying for you, press the ENT button to enter this option.
You will be shown the device firmware version that is on the device. Press any button to return to the About menu.

Was it helpful?

Yes

Neutral

* iStorage/Kanguru defines a gigabyte (1 GB) = 1,000,000,000 bytes. Storage capacities may vary depending on operating system. The actual capacity reported by systems like Windows is often lower. In Windows operating systems, an xx GB [e.g., 16 GB] flash drive has a minimum reported capacity of xx GB [e.g., 14.4 GB]. Product storage capacity is also used for device formatting and internal functions. For additional information, see www.kanguru.com/pages/understanding-flash-drive-storage-capacity.

Recover password

HD Pro Duplicator - About - System Information

Thanks for your feedback