HD Pro Duplicator - Advanced Setup - Set Kick Time

If Auto Kick Slow has been enabled, the Set Kick Time option will define the how long a drive can operate below the speed defined by Set Kick Speed before it is ejected from the operation. Tap the ENT button to change this option.

NOTE: This is only available on the 15-Target and 23-Target Hard Drive SATA Pro Duplicators.

The time can be set from 1 to 120 seconds. The default setting is 30 seconds.

To alter the Set Kick Time setting:

1. Power on the duplicator.
2. From the Main Copy Menu press the ESC button to enter the Menu Select mode.
3. Press the Up or Down buttons until you see Advanced Setup.
4. When Advanced Setup is displaying for you, press the ENT button to enter this menu.
5. Press the Up or Down buttons until you see Set Kick Time.
6. When Set Kick Time is displaying for you, press the ENT button to alter the setting.
7. Use the Up or Down buttons to alter the setting.
8. Press the ENT button to save the setting.
9. Press the ESC button to return to the Menu Select mode.