Home Docs 7-Target, 15-Target, 23-Target Pro SATA Duplicator Knowledge Base

HD Pro Duplicator...

HD Pro Duplicator - Main Setup - Source Power Off

Updated on May 18, 2026

sidebar-icon

The Source Power Off option allows you to configure whether the system turns off power to the Source drive after a process is completed. Tap the ENT button to change this option.

Disabled

Source Power Off is disabled. The system will keep the Source drive powered on after a process is completed.

Enabled

Source Power Off is enabled. The system will shut off power to the Source drive after a process is completed.  Note: This is the Default setting.

To alter the Source Power Off setting:

  1. Power on the duplicator.
  2. From the Main Copy Menu press the ESC button to enter the Menu Select mode.
  3. Press the Up or Down buttons until you see Main Setup.
  4. When Main Setup is displaying for you, press the ENT button to enter this menu.
  5. Press the Up or Down buttons until you see Source POW. Off.
  6. When Source POW. Off is displaying for you, press the ENT button to alter the setting.
  7. Once you have altered the setting, you can press the ESC button to return to the Menu Select mode.