The Kanguru Defender 3000 has Achieved FIPS 140-3, Level 3 Certification, Making It an Excellent Choice for Today's Complex Data Security Environments

HD Pro Duplicator - Main Setup - Total Copy Count

Updated on May 18, 2026

Total Copy Count keeps track of the total number of successful and unsuccessful duplications produced by the system. This is a running count that includes all copy modes.

To use Total Copy Count:

Power on the duplicator.
From the Main Copy Menu press the ESC button to enter the Menu Select mode.
Press the Up or Down buttons until you see Main Setup.
When Main Setup is displaying for you, press the ENT button to enter this menu.
Press the Up or Down buttons until you see Total Copy Count.
When Total Copy Count is displaying for you, press the ENT button to enter the setting.
Once you have viewed the information, you can press the ESC button to return to the Menu Select mode.

Was it helpful?

Yes

Neutral

* iStorage/Kanguru defines a gigabyte (1 GB) = 1,000,000,000 bytes. Storage capacities may vary depending on operating system. The actual capacity reported by systems like Windows is often lower. In Windows operating systems, an xx GB [e.g., 16 GB] flash drive has a minimum reported capacity of xx GB [e.g., 14.4 GB]. Product storage capacity is also used for device formatting and internal functions. For additional information, see www.kanguru.com/pages/understanding-flash-drive-storage-capacity.

Recover password

HD Pro Duplicator - Main Setup - Total Copy Count

Thanks for your feedback