USB Duplicator - Setup Menu
The Setup menu contains additional settings that allow you to view and modify certain features on the duplicator or media connected to it.
| Language | Allows you to change the language of the menu options and prompts on the display. |
| Auto Start | Auto Start allows you to define the amount of time the duplicator will wait for additional USB devices to be connected to the device after a duplicator function such as Copy, Compare, Erase, or Format is selected. |
| Read Error Skip | Read Error Skip allows you to configure the number of times the system will skip over sectors when it encounters a read error when reading from the USB in the Source port. |
| Write Error Skip | Write Error Skip allows you to configure the number of times the system will skip over sectors when it encounters a write error when copying to Target devices. |
| Size Tolerance | The duplicator will allow the Target flash devices to be less than the capacity of the Source drive by the percentage specified. |
| Port Detection Warning | This will allow the system to show a warning message if the total # of ports available are less than the preset. |
| Buzzer | This allows you to turn on and off the audible indicator sound the duplicator makes. |
| Startup Menu | This allows you to designate which menu option on the Main Menu is displayed when the device is powered on. |
| Erase Prior Copy | The duplicator will run an Erase (Quick, Raw, or Secure) on Target devices before copying |
| Async Mode | This converts modes Compare and Copy and Compare into asynchronous variations of those modes. |
| Dual Source Mode | This allows you to designate port #2 (first target port) as a read only port used for the Compare process. |
| Min. Copy Speed | Min. Copy Speed is designed to verify the blank target USB drives are able to reach a minimum write speed. |
