Home Docs 7-Target, 15-Target, 23-Target Pro SATA Duplicator Knowledge Base

HD Pro Duplicator...

HD Pro Duplicator - Advanced Setup - No MBR Check

Updated on May 18, 2026

sidebar-icon

The No MBR Check option will allow the duplicator to start a copy process without checking the MBR table. This is because some drives do not have a standard MBR table, however the data residing within are correct and the duplicator is able to copy them.  Tap the ENT button to change this option.

Disabled

The duplicator will not check the MBR table before starting the copy process. Note: This is the Default setting.

Enabled

The duplicator will check the MBR table prior to copying to ensure that it is healthy and intact.

To alter the No MBR Check setting:

  1. Power on the duplicator.
  2. From the Main Copy Menu press the ESC button to enter the Menu Select mode.
  3. Press the Up or Down buttons until you see Advanced Setup.
  4. When Advanced Setup is displaying for you, press the ENT button to enter this menu.
  5. Press the Up or Down buttons until you see No MBR Check.
  6. When No MBR Check is displaying for you, press the ENT button to alter the setting.
  7. Once you have altered the setting, you can press the ESC button to return to the Menu Select mode.