Home Docs 7-Target, 15-Target, 23-Target Pro SATA Duplicator Knowledge Base

HD Pro Duplicator...

HD Pro Duplicator - Main Setup - Verify Source Check

Updated on May 18, 2026

sidebar-icon

The Verify Source Check option allows you to configure whether the system checks the Source’s CRC to ensure that the source data is healthy before starting a copy process. Tap the ENT button to change this option.

Disabled

Verify Source Check is disabled (default). The duplicator will not check the Source’s CRC before a copy process.  Note: This is the Default setting.

Enabled

Verify Source Check is enabled. The duplicator will check the Source’s CRC and ensure the source data is healthy before starting a copy process.

To alter the Verify Source Check setting:

  1. Power on the duplicator.
  2. From the Main Copy Menu press the ESC button to enter the Menu Select mode.
  3. Press the Up or Down buttons until you see Main Setup.
  4. When Main Setup is displaying for you, press the ENT button to enter this menu.
  5. Press the Up or Down buttons until you see Verify Source CH.
  6. When Verify Source CH. is displaying for you, press the ENT button to alter the setting.
  7. Once you have altered the setting, you can press the ESC button to return to the Menu Select mode.