4-Target NVMe Duplicator - General Operation - Erase
To Erase drives connected to the duplicator:
- Connect the drives to be erased to the duplicator. Note: By default, the Erase operation is not performed on the drive connected to the Source port. This behavior can be changed in the Settings Menu under the Option tab.
- From the Main menu, configure the Erase Mode.
- Tap Erase.
The KanguruClone duplicator supports multiple Erase modes that you can use depending on how securely you need the data erased.
|
Custom |
Performs a custom erase based on settings defined in the Settings Menu located under the Erase tab. |
|
|
Quick |
Overwrite the partition table. This is the quickest erase mode, but least secure. |
|
|
Full |
Overwrite all sectors. This is a slower erase mode but more secure. |
|
|
Wipe |
Perform a multi-pass erase. This is the slowest erase mode, but most secure. You can alter the number of cycles performed located under the Settings Menu located under the Erase tab. |
|
|
Pass 1 |
Overwrite all addressable locations with binary zeroes. |
|
|
Pass 2 |
Overwrite all addressable locations with binary ones. |
|
|
Pass 3 |
Overwrite all addressable locations with a random bit pattern. |
|
|
Pass 4 |
Verify the final overwrite pass. |
|
