11-Target NVMe Duplicator - Connecting M.2 Drives
To connect an M.2 NVMe or M.2 SATA Drive: Slide all Locking Pins away from the M.2 Sockets. Align the M.2 SSD to the Socket with the M-key notch positioned to...
11-Target NVMe Duplicator - Connecting Standard SATA Drives
Users upgrading their computer hardware often need to make a duplicate of their SATA HDD or SSD on a high-performance M.2 NVMe or M.2 SATA drive. The KanguruClo...
11-Target NVMe Duplicator - FAQ
Question Answer Is the duplicator able to copy SATA M.2? Yes, the KanguruClone M.2 NVMe Duplicator supports both PCIe M.2 and SATA M.2 natively....
11-Target NVMe Duplicator - General Operation
All operation of the KanguruClone 11 NVMe is done using the touch-screen display. Once the duplicator boots up, you see the Main Menu screen. All the main func...
11-Target NVMe Duplicator - General Operation - Erase
To Erase drives connected to the duplicator: Connect the drives to be erased to the duplicator. Note: By default, the Erase operation is not performed on the...
11-Target NVMe Duplicator - General Operation - Erase - Sanitize Erase
Sanitize Erase is a set of firmware commands available on many ATA drives. These commands are used as a secure method of data sanitization by completely overwri...
11-Target NVMe Duplicator - General Operation - Erase - Security Erase
Secure Erase is a set of firmware commands available on many ATA drives. These commands are used as a secure method of data sanitization by completely overwriti...
11-Target NVMe Duplicator - General Operation - Full, Brief, and Resize Copy and Compare
The KanguruClone can copy data from a Source drive to Target drives in one of five modes: Full FULL mode copies/compares drives sector by sector from the...
11-Target NVMe Duplicator - General Operation - Load
Load function allows you to store disk image files to a Storage Center drive. A Storage Center drive is an NVMe drive that has been formatted to store image fil...
11-Target NVMe Duplicator - General Operation - Ratio Copy
The Ratio mode allows you to copy or compare a defined percentage of the Source drive. The Source drive is divided in 1000 units. You must define the beginning...
11-Target NVMe Duplicator - General Operation - Verify
Verify will check all connected drives and determine if they are readable. The verification operation will check any drive connected to a Target port and verifi...
11-Target NVMe Duplicator - Getting To Know Your Duplicator
Hardware Setup Place the KanguruClone where there is proper ventilation. Avoid using the KanguruClone in environments with high temperatures. Make sure that su...
11-Target NVMe Duplicator - M.2 SSD Compatibility
KanguruClone M.2 NVMe Duplicators support PCIe M.2 SSDs, commonly known as NVMe SSDs as well as SATA M.2 SSDs. Both SATA M.2 and PCIe M.2 SSDs use a similar p...
11-Target NVMe Duplicator - Parts and Appearance
Front View Side View Rear View
11-Target NVMe Duplicator - Settings
The settings can be accessed by tapping on the Settings icon located at the bottom right of the Main menu. Copy Copy provides the ability to set options t...
11-Target NVMe Duplicator - Settings - Copy
The Copy options provides the ability to set options to perform before the copy process starts as well after the copy process completes. Additionally, you are...
11-Target NVMe Duplicator - Settings - Erase
Erase Settings allows you the ability to set customer erase settings as well as number of cycles performed during the wipe process. Write 0 Overwrite all...
11-Target NVMe Duplicator - Settings - Format
Format allows you to choose what file system the format feature uses as well as allows you to format for the connected drives. You can select the file system th...
11-Target NVMe Duplicator - Settings - Misc
Misc Settings allow you to alter system-based settings. These settings do not alter operations with the drives but rather base settings. Machine Name Giv...
11-Target NVMe Duplicator - Settings - Option
Options Settings allow you to alter operation-based settings. These settings alter its operations with drives not the system-based settings. Capacity Check...
11-Target NVMe Duplicator - Settings - Ratio
In order to perform a Ratio Copy, you must set the beginning and ending percentages. Ratio Head Define the ratio head start and end boundaries. The defaul...
11-Target NVMe Duplicator - Specifications
Model KCLONE-11NVME Interface M.2 M-keyed M.2 B+M-keyed Drive Support PCIe based NVMe SSD SATA based M.2 SSD Display Full-color...
11-Target NVMe Duplicator - Troubleshooting
The duplicator will not boot or freezes curing boot. The device has media (drives) connected to it while powering on. Power the device off and disconnec...
4-Target NVMe Duplicator - Calibrating the Touchscreen
One of the main features of the KanguruClone 4 M.2 NVMe Duplicator is the touchscreen user interface. If you are having issues with the accuracy of the touchscr...
4-Target NVMe Duplicator - Connecting M.2 Drives
The KanguruClone 4 NVMe supports NVMe SSDs that have an M.2 M-keyed connector as well as SATA M.2 B+M-keyed connectors. To connect an M.2 solid state drive to t...
4-Target NVMe Duplicator - FAQ
Question Answer Do all Target drives have to be the same capacity? If you select Full copy or Brief copy, the Target drives must have at least the s...
4-Target NVMe Duplicator - General Operation
All operation of the KanguruClone 4 NVMe is done using the touch-screen display. Once the duplicator boots up, you see the Main Menu screen. All the main funct...
4-Target NVMe Duplicator - General Operation - Erase
To Erase drives connected to the duplicator: Connect the drives to be erased to the duplicator. Note: By default, the Erase operation is not performed on the d...
4-Target NVMe Duplicator - General Operation - Full, Brief, and Resize Copy and Compare
The KanguruClone can copy data from a Source drive to Target drives in one of five modes: Full FULL mode copies/compares drives sector by sector from the...
4-Target NVMe Duplicator - General Operation - Load
Load allows you to access image files saved on a Storage Center drive. A Storage Center drive is an NVMe drive that has been formatted to store image files of...
4-Target NVMe Duplicator - General Operation - Ratio Copy
The Ratio mode allows you to copy or compare a defined percentage of the Source drive. The Source drive is divided in 1000 units. You must define the beginnin...
4-Target NVMe Duplicator - General Operation - Verify
Verify will check all connected drives and determine if they are readable. The verification operation will check any drive connected to a Target port and verifi...
4-Target NVMe Duplicator - Getting To Know Your Duplicator
Hardware Setup Place the KanguruClone where there is proper ventilation. Avoid using the KanguruClone in environments with high temperatures. Make sure that su...
4-Target NVMe Duplicator - M.2 SSD Compatibility
KanguruClone M.2 NVMe Duplicators support PCIe M.2 SSDs, commonly known as NVMe SSDs as well as SATA M.2 SSDs. Both SATA M.2 and PCIe M.2 SSDs use a similar p...
4-Target NVMe Duplicator - Maxi Management Software
The Maxi Management software allows you to connect and manage a duplicator with a PC. Maxi Management software (henceforth referred to as Maxi) is only compatib...
4-Target NVMe Duplicator - Maxi Management Software - Brief Load
If you are using the storage center, Brief Load is used to build a data image of a Source drive connected to the duplicator’s Source port, and save it loc...
4-Target NVMe Duplicator - Maxi Management Software - Full Load
If you are using the storage center, Full Load is used to build a full disk image of a Source drive connected to the duplicator’s Source port, and save it...
4-Target NVMe Duplicator - Maxi Management Software - Restore Image to Client Source Devices
If you are using the storage center, Restore or load an image file saved on the host PC to a Source drive connected to the KanguruClone’ s Source port. O...
4-Target NVMe Duplicator - Parts and Appearance
Front View Side View Rear View
4-Target NVMe Duplicator - Setting - Advanced
Advanced Settings allow you to alter system-based settings. These settings do not alter operations with the drives but rather base settings. System Time...
4-Target NVMe Duplicator - Setting - Copy
The Copy options provides the ability to set options to perform before the copy process starts as well after the copy process completes. Additionally, you are...
4-Target NVMe Duplicator - Setting - Erase
Erase Settings allows you the ability to set customer erase settings as well as number of cycles performed during the wipe process. Methods Configure a CU...
4-Target NVMe Duplicator - Setting - Network
Network settings must be configured if you are using the Maxi PC software to access the Duplicator over a LAN. The address information is only able to be viewed...
4-Target NVMe Duplicator - Setting - Option
Options Settings allow you to alter operation-based settings. These settings alter its operations with drives not the system-based settings. Capacity Check...
4-Target NVMe Duplicator - Setting - Ratio
In order to perform a Ratio Copy, you must set the beginning and ending percentages. Ratio Head Define the ratio head start and end boundaries. The defaul...
4-Target NVMe Duplicator - Settings
The settings can be accessed by tapping on the Settings icon located at the bottom right of the Main menu. Copy Copy provides the ability to set options t...
4-Target NVMe Duplicator - Specifications
Model KCLONE-4NVME Interface M.2 M-keyed M.2 B+M-keyed Drive Support PCIe based NVMe SSD SATA based M.2 SSD Display Full-color 4...
4-Target NVMe Duplicator - Troubleshooting
The duplicator will not boot or freezes curing boot. The device has media (drives) connected to it while powering on. Power the device off and disconnec...
NVMe Duplicator Statement of Volatility
Statement of Volatility for the 4-Target and 11-Target NVMe Duplicators SoV NVMe Duplicator.pdf